How to Eject Water from Your Redmi Note 8 and Redmi Note 8 Pro’s Speaker
If, by any chance in the world, your Redmi Note 8 or Redmi Note 8 Pro comes in contact with water, odds are, you'll be distressed. Don’t be too anxious, though! In most cases, the worst thing that could happen to the device is muffled or distorted sound. All because water got into the speaker, and it’s necessary to expel it as quickly as possible.
This article will take you through all the actions you will need to take, step by step. Keep reading to get a better idea of what to do in case your Redmi Note 8 or Redmi Note 8 Pro’s speaker displays muffled or distorted sound after getting into direct contact with water.
This article will take you through all the actions you will need to take, step by step. Keep reading to get a better idea of what to do in case your Redmi Note 8 or Redmi Note 8 Pro’s speaker displays muffled or distorted sound after getting into direct contact with water.
Remove Water from Redmi Note 8 Pro?
Initial Steps
First and foremost, before anything else, you need to do the following:
First and foremost, before anything else, you need to do the following:
- Switch the device off. Otherwise, there is a huge risk that the water will get to the sensitive internal parts of the phone and will cause a short circuit. That kind of damage you can’t remedy easily, so don’t leave your Redmi Note 8 or Redmi Note 8 Pro switched on.
- Remove all accessories. Any accessories, including the protective case and the SIM card, could prevent the water from getting out. By removing those, you will increase your chances of not letting water remain within the device to begin with.
- Find a dry and well-ventilated area for your phone to dry. Also, place it in a box filled with silica gel pallets. Despite a common misconception, using rice instead of silica gel may cause certain issues - debris and dust could infiltrate your device and cause more problems in the long run.
Water Damage RedMi 8
User Low-Frequency Sound
Now that you’ve dried your Redmi Note 8 or Redmi Note 8 Pro well, it’s time to check the sound. If the issue persists, it means that some water still remains in the speaker, and you need to handle this matter as well.
One of the fastest and most effective ways to go would be using an app that produces low-frequency sound. Typically it’s 165 Hz. Apps like Clear Wave work best and are available for free, so you can start expelling water from the speaker right away.
Here’s what you need to do in order to eject water from your Redmi Note 8 or Redmi Note 8 Pro’s speaker:
It’s the fastest and most efficient solution that will allow you to handle the issue quicker than anticipated!
Now that you’ve dried your Redmi Note 8 or Redmi Note 8 Pro well, it’s time to check the sound. If the issue persists, it means that some water still remains in the speaker, and you need to handle this matter as well.
One of the fastest and most effective ways to go would be using an app that produces low-frequency sound. Typically it’s 165 Hz. Apps like Clear Wave work best and are available for free, so you can start expelling water from the speaker right away.
Here’s what you need to do in order to eject water from your Redmi Note 8 or Redmi Note 8 Pro’s speaker:
- Download and install Clear Wave. It’s pretty much effortless and won’t take more than a minute.
- Run the app for 1-2 minutes. Don’t forget to ensure that your Redmi Note 8 or Redmi Note 8 Pro is facing the ground.
- Check the sound quality. If the issue persists, run the Clear Wave app again as many times as you need until the sound quality gets back to normal.
It’s the fastest and most efficient solution that will allow you to handle the issue quicker than anticipated!
Hence, if you’re looking for the fastest way to handle the issue with Redmi Note 8 or Redmi Note 8 Pro’s speaker after getting in contact with water, the Clear Wave app is the ultimate tool that will not let you down!