How to Get Water Out of Your iPhone 16 Pro Max Speaker

If you’re a lucky iPhone 16 Pro Max owner, your worst nightmare is exposing it to water. Exposure could lead to sound-related issues and damage the speakers in the long run. The iPhone 16 Pro Max features the IP68 water resistance rating, so it can handle light splashes and even brief submersions.

However, it’s not entirely waterproof, and water may still seep into the speaker grills.

Luckily for you - we’ve collected some of the most effective guidelines that will allow you to safely remove water from your iPhone’s speakers in no time.

1. Turn Off Your iPhone Immediately
Before anything else, turn off your iPhone as soon as possible. Otherwise, there’s a real risk of a short circuit. Granted, the phone might appear to be functioning just fine, but that doesn’t mean there’s no risk of internal damage. So, turn it off ASAP!

2. Shake Out Excess Water
The next important step is shaking out excess water. Put the iPhone speaker-side down, then gently shake it to dislodge any trapped water. It’s a simple action, but it’s a very helpful one. It expels moisture from the speaker grill without damaging the sensitive internal components.

3. Use a Low-Frequency Sound App
If you need to eject water from your iPhone’s speakers, low-frequency sound waves are the most effective way to go. With apps like Clear Wave, you can make the most of your needs in no time at all. They are specifically designed for this purpose and are extremely effective, so you will definitely get the most from them.

How to Use Clear Wave:

1. Download Clear Wave: Install the app from the App Store.
2. Place the iPhone Speaker-Side Down: Position the device on a flat surface with the speaker facing down.
3. Run the App: Select the 165 Hz frequency and play the sound for 2-3 minutes.
4. Check the Speaker: Repeat the process until the sound quality improves.

4. Dry the Speaker Grill
Absorb excess water by gently patting the speaker area with a soft microfiber cloth. Don’t press too hard;—this will only push water further into the phone.

5. Avoid Common Mistakes
There are some common mistakes that most people make when trying to dry their iPhone 16 Pro Max. Make sure you avoid the following:

• Using a Hair Dryer or Heat: Excessive heat can damage internal components and melt adhesives.
• Inserting Sharp Objects: Don’t use sharp tools to poke the speaker grill, which can cause permanent damage.
• Using Rice: The rice method can introduce dust particles into the speaker, which may lead to additional problems.

6. Air Dry the Device
Find a cool, well-ventilated area and place your phone there to dry. If possible, put it in an airtight container with silica gel packets. Leave it there for 24-48 hours. Silica gel is designed to absorb moisture, and it’s way more effective than other methods since it doesn’t damage the internal components while drying them completely.

7. Test the Speaker
Once you’re done drying your iPhone 16 Pro Max, it’s about time to test the speaker:

• Play a Sound: Check for clarity and loudness.
• Make a Call: Ensure the audio is clear during phone calls.
• Check for Distortion: If sound quality remains poor, repeat the water removal steps or consult a professional.

These seemingly simple yet highly effective steps will help you effectively remove water from your iPhone 16 Pro Max speaker, restoring the sound quality to normal. If you want to achieve stellar results faster, you can use tools like the Clear Wave app, which makes the process simpler, faster, and more efficient. Be sure to act quickly to prevent any damage from occurring.